The Grand National Horse Show at the Cow Palace in San Francisco

Although I knew that Peter Mikkelsen sponsored the sidesaddle class at the Grand National Horse Show, I had actually never been to the event.  I received an email from Karol Kafka, co-founder of CA Aside, letting me know that the event was coming up on October 25, that she was bringing Peter and inviting me to join them.  I invited one of my non-horsey friends who was interested to see what this sidesaddle thing is all about and experience a horse show. 

The sidesaddle class was delayed, but that just gave us time to catch up and visit with Karol and Peter.  There was a time when there was much stronger support for this show and in general, the attendance seemed kind of sparse.  Peter mentioned that one year there were 18 riders in the sidesaddle class.  This year there were 4 registered and 2 cancelled, so there were only two riders in the class.  They were both very nicely turned out – 1 western, 1 English hunt – and both experienced riders, so it makes it a difficult choice.  The English rider, Laura Stevens , took first place and the western rider, DeeDee Kramer was a close second. 

The western rider was a trainer named DeeDee Kramer, who I had met more than a year ago – maybe 2 – when a client of hers had bought a sidesaddle on trial and wanted to have the fit checked.  As it turned out, they stabled only a few miles from me, so I had gone over to check on it for them and met DeeDee there.

The English rider was also a local trainer, even closer to where I live though I had not met her previously.  She trains, teaches and works with Welsh ponies.  After the class I had the opportunity to visit with her briefly and let her know I was going to be taking an English saddle making class and that at Level 2 I will be making a pony saddle.  She was so excited!  “It’s hard to find saddles that fit these ponies. Ponies are so hard to fit!”  The thought occurred to me that if anyone were interested in having a custom pony saddle made, it would be helpful for me to know their measurements and to order the tree to fit a particular client or horse.  She thought it was a great idea and we agreed to keep in touch.


Becoming a saddler and a blogger...

When I put this site together for my mom, she had grand plans to use the blog as a repository for information and writings on various topics and questions being asked by her clients or interesting things she had come across. I will endeavor to do the same. Since I began working towards continuing the legacy of saddlery, I’ve had several interesting experiences.  I think that it will be fun to document and share this journey with my family and friends and clients new and old.  I’ll share these experiences and try to post once a week or two weeks depending on the volume of activity (or lack thereof).

Making a cast of your horse's back

When looking for a saddle to fit your horse with a challenging build, it is easier to transport the shape of the horse's back than the whole horse.  A simple method of creating a cast of your horse's back is to purchase a box of plaster impregnated cotton gauze strips from your local art & craft store (like Blick) or order online and follow the instructions for use.  There are a variety of sources.  

It is not necessary to "line" the horse's back with plastic or petroleum jelly.  Measure the strips into lengths which will be long enough to reach from one side of the horse to the other like a saddle blanket.  Dip the pieces in warm water and spread across the horse's back, overlapping the strips. Apply a second layer of strips lengthwise, smoothing the ends into the layer below.  Working quickly apply a third layer crosswise like the first layer.  The plaster cast needs to harden on the horses back otherwise, the shape will shift and an inaccurate shape will be useless.  Be aware that hardening plaster generates a fair amount of heat, so you don't want to make too many layers of gauze.  After 30 to 45 mins, lift the cast off of the horse's back and brush off the plaster dust.  It still needs to cure for a minimum of 24 hours, so DO NOT put the cast directly into a box and ship.  It will lose it's shape and you will have spent your time and expense on something that will not serve the purpose intended.

Now, with a duplicate of your horse's back, you can take it to a saddle shop, private party or ship it to a saddler to make a custom saddle to fit your uniquely built steed.

Measuring for a sidesaddle


When measuring for a sidesaddle, there are five measurements needed to ensure the best fit possible. (The best way to obtain the first four of these measurements, is to drop your leg over the end of a picnic bench.)

1.  Seat length.  Mark behind the seat, and then measure the length of the leg, from behind the knee to the back of the seat.  This corresponds with the measurement of the saddle from in front of the horn to the cantle.

2.  Seat width.  This should also be measured in the "sitting" position.  Mark the left and the right sides of the hips and measure across.  This corresponds with the width of the seat of a sidesaddle.

3.  Height of the knee.  Measure from the top of the bench to the top of the knee.  This corresponds to the height of the horn on the saddle.

4.  Circumference of the knee.  Measure around the knee.  This dictates how far out from center the top horn is to be set.

5.  Type and size of the horses back and withers.  The best way to accomplish this is to make a cast of your horses back to send to the saddler or seller of the saddle your are considering using.  Instructions on how to make a back cast can be found here.

Selecting a Sidesaddle

When contemplating beginning your new endeavor of riding sidesaddle, there are a few basic steps to start with.

First, consideration must be given to the style and purpose for which you will be riding. Generally speaking, you will see western stock, English hunt, English park, and older "period" saddles which predate some of the "modern" designs of the western and English styles.  

If you prefer western style, you will see a variety of sidesaddles built in the same style as a western astride stock saddle potentially from a broad span of time.  The western style, in one form or another, has been in production from the late 1800's to this year.  Some reflect more of a working saddle style with saddle strings, some are more highly decorated with intricately carved designs and silver conchos instead of saddle strings.  The seats may have smooth or stamped leather, or a quilted suede seat.  The rigging will also be similar to a western stock saddle with cinches and latigos.

If you prefer to ride in the English style, but have no intentions of ever purposely leaping over a fence or a downed tree, you likely do not need a hunt saddle reinforced for jumping.   English park, or saddle seat, saddles were designed for light use such as a social ride through the park.  However, if you are of the adventurous set, an English hunt saddle would be most appropriate since the tree itself is reinforced to withstand the impact of the hunt and leaping over obstacles such as fences, hedges, downed trees, sheep, goats, small children, etc.  

If you are a historical re-enactor whose persona being portrayed is from 1840, that would predate some of the features of the modern English and western sidesaddles.  Although some of these saddles were quite beautiful, with tapestry seats, trapunto quilting and sometimes even actual embroidery, most have not survived the turning of two centuries intact.  If they have survived in good condition, the historical value may exceed the functional value and they really should be in a museum or kept for display as they are rare examples of the craftsmanship and design aesthetic of the era.  If you happen to be a short petite woman riding a slender, high withered horse, you may be at an advantage if you choose to ride it.  Some of these saddles have been restored, but most are not really compatible with the size and shape of modern horses or riders.  You would not only find that these saddles are more of a challenge to find, but to fit and to ride as well.  

In the same way that shoes of different brands fit differently, sidesaddles of different brands may fit differently.  Once you have measured yourself (detailed here), and know what size saddle to look for, your quest begins.  It is not unusual for riders to start with one saddle that is reasonably workable and then trade up when they find one that they find a better, more comfortable fit.  In any case, it is always good to educate yourself and ask any questions (take pictures of anything you have doubt about) and any of the more experienced sidesaddle riders will be happy to share their knowledge and experience.